In recent months, all over the country ushered in the most stringent environmental supervision, environmental protection Department frequency "killer", the specifications of the high, strict requirements, the strength of large, so that most of the coating enterprises "such as mount on the back, on pins and needles." And in 2016, the Central Environmental Protection Supervision Group of 16 provinces and cities to carry out supervision, a total of more than 8,500 penalties, a fine of 440 million yuan, the investigation of 800, detain 720 people, interview 6307 people, accountability 6454, chemical industry has become a national environmental focus "care" object.
You think this is the end? Recently, the Ministry of Environmental Protection has released the relevant documents of paint (annulus air letter [2017 565 No.), solicit "paint, ink and adhesive industry atmospheric pollutant Emission standard" (soliciting draft), "VOC Emission Control standard" (draft) two national environmental protection standards.
Document states that in order to implement the environmental protection law of the People's Republic of China and the Air pollution Prevention Law of the People's Republic of China, protect the environment and protect human health, the Ministry of Environmental Protection decides to enact the standard of emission control of volatile organic compounds and the emission standard of industrial air pollutants from paints, inks and adhesives. At present, the standard-setting units have been prepared to complete the draft of the standard of soliciting opinions, particularly on the standard to the relevant units to solicit comments (at the end of the text with a detailed list of enterprises), and request the feedback before May 25, 2017.
According to the content, the new "coatings, inks and adhesives industrial atmospheric Pollutants Emission standards" provides for paints, inks and adhesives industrial air pollutants emission limits, monitoring and supervision of management requirements, applicable to existing coatings, inks and adhesives industrial enterprises or production facilities of atmospheric pollutant emissions management, as well as paints, inks and adhesives industrial construction projects, environmental impact assessment, environmental protection facilities design, completion and acceptance of the air pollutant emissions management after production.
Paints, inks and adhesives industrial enterprises, synthetic resin production and modification of the production plant to implement GB31572 "synthetic resin industrial pollutant discharge standard", emulsion manufacturing according to the standards.
In addition, existing enterprises will implement the existing standards as of January 1, 2019 and implement the atmospheric pollutant emission limits as set out in table 1 after January 1, 2019.
Since July 1, 2017, the limits of atmospheric pollutant emissions from new enterprises.
Special emission limits for atmospheric pollutants specified by enterprises or production facilities in key areas. The scope and time of the implementation of the special emission limits for air pollutants shall be prescribed by the Environmental Protection Department of the State Council or the provincial government.
The standard stipulates that enterprises should be based on the use of raw materials, production process, production products, by-products, combined with the environmental impact assessment document and Appendix A to the "common paint, ink, adhesive industry emissions of the main air pollutants", screening and reporting of the need to control the atmospheric pollutant projects, and carry out day-to-day monitoring, management.
The standard also puts forward the control request to the organization-free emission. Enterprises should collect the emission of waste gas to the waste gas collection system and/or treatment facilities, and their atmospheric pollutant emissions shall comply with the above requirements. and require enterprises in all aspects of production should strictly control the volatile organic matter of the Organization of emissions, equipped with VOCs equipment or containers must be stamped or other coverings. In addition to feeding and testing, the coverage of equipment or containers containing VOCs shall be ≥ 90%.
Environmental protection and energy-saving emission reduction as the entire development of the environment must be through the road, whether it is the government supervision Department of the ruthless side, or enterprises in the interests of the drive "to the money not life", the core of its development is the sustainable development model of chemical enterprises, in the long run, in the environmental protection under the storm can survive the enterprise, in its own planning layout must be changed, strengthen brand building, and strive to build their own core competitiveness.
For paint enterprises, because of financial strength and cost factors, has been difficult to have the subjective will to carry out pollution treatment enterprises, the environmental supervision and the new standard is an opportunity. Enterprises only in the break with the game, homes and the adjustment, to hold back the pain, and unswervingly promote backward production capacity elimination, in this environmental storm in order to realize the transformation and upgrading of enterprises, and then promote the sustainable development of the entire industry.